Advanced Water Treatment Solutions

Features you will love

01 Measure and adjust pH and Chlorine

To guarantee clean and safe water, the Wifipool Duo automatically regulates the pH (acidity) of the water between 7.2-7.6 and the chlorine content between 0.5 and 1.5 ppm

The pH is measured continuously with a pH probe.

Chlorine is measured by a Redox probe for salt electrolysis. In general, a Redox of 700mV corresponds to 1 ppm of chlorine. The redox sensor is covered with a protective layer of gold.

If the pH is too high, the system will automatically dose acid to correct the pH via a peristaltic pump. For a swimming pool of 50 m³ you need +- 15 to 30 cl 15% sulfuric acid (= one glass) per day.

To adjust the chlorine, the salt electrolysis will automatically produce chlorine (or bleach) via a salt electrolysis cell. For a swimming pool of 50 m³, you need a salt electrolysis device that produces at least 15 g of chlorine per hour.

For a salt electrolysis to work, it is necessary to add salt to the pool beforehand. This salt is then converted into chlorine by the electrolysis cell. After reaction of the chlorine with algae and bacteria, the chlorine is converted back to salt.

02 Plug & Play - water treatment installation

The Wifipool Duo Gen 2 can be fully pre-assembled on a plate. All connections and pipes have already been made, so no need to assemble anything yourself. Simply connect the panel to the return pipe to the pool in a 50mm pipe. This can be done via the supplied 50mm rubber sleeves. A bypass is not required.

All accessories for installation and use (probes, calibration fluid, manual ...) are included. The normal operating conditions (pH 7.2-7.6, Redox > 700mV) are already pre-programmed in the device.

03 WiFi version

The WiFi version works via the "Wifipool app". The advantage of this solution is that you can verify and adjust your water quality literally anywhere in the world. You can also measure and adjust other parameters of your swimming pool (temperature, level, flow) via the Wifipool app and equipment.

It continuously monitor the pH and the Redox (Chlorine). As soon as one of the two needs to be adjusted, the salt electrolysis and/or pH pump is activated.

04 Add Additional Pool Device

On Wifipool Duo Gen 2 you can add 4 additional devices. You can add your pool pump, pool lights, your heat pump etc. They all can be controlled via the "Wifipool app". The advantage is you can use some of your existing devices.

What are you waiting for go and get your products from our shop. Any question please contact us at beniferro.au@gmail.com